Single-phase control panel

BASIC+ · BASIC+HR · BASIC+MN

Single-phase control panel for residential and condominium use

Application: up-and-over, swing, sliding, folding and sectional doors, posts and barriers

Specifications

Application
Residential and
Condominium
Built-in receivers
15c MOTION
Power supply
230V
Number of motors
1
Power engines (kW)
0.55kW

Range

BASIC+

Ref: 1000540

  • Operating panel for sliding garage doors for residential and communal use.
  • With gentle opening and closure stoppage (deceleration at end of opening and closure movement).
  • Independent time adjustment for opening/closure.
  • Option switch to select gentle stoppage, automatic closure, no reverse on opening and closure by safety contact, among others.
  • Pedestrian opening.
  • Status display by ERROR LED.
  • No electric lock.
  • 868 MHz receiver with 15 codes built in (except BASIC+MN S/R)
  • Active input switch. Safety inputs not used do not have to be bridged

BASIC+HR

Ref: 1000546

  • Operating panel for sliding garage doors for residential and communal use.
  • With gentle opening and closure stoppage (deceleration at end of opening and closure movement).
  • Operations by time or by pulses (HALL sensor).
  • Independent time/pulses adjustment for opening/closure.
  • Option switch to select gentle stoppage, automatic closure, no reverse on opening and closure by safety contact, among others.
  • Pedestrian opening.
  • The second channel on the control acts as a pedestrian button or switches the courtesy light on/off.
  • Electric-lock using accessory board.
  • Connector for RADIOBAND/RCS receiver card or traffic light card with traffic control.
  • Status display by ERROR LED.
  • 868 MHz receiver with 15 codes built in.
  • Active input switch. Safety inputs not used do not have to be bridged.

BASIC+MN

Ref: 1000552

  • The same model as the Basic+ but smaller and with no box.
  • Dimensions: 130 x 95 x 40 mm.

Downloads

Product's sheet  PS_PC04_BASIC_EN.pdf (389.2 KB)User's manual  UM_1257013_BASIC_EN.pdf (416.1 KB)

BASIC+
Declaration of conformity  CE_BASIC_EN.pdf (65.6 KB)
BASIC+HR
Declaration of conformity  CE_BASICHR_EN.pdf (65.6 KB)

Scheme

Projects

RATE THIS PRODUCT
product image
Rating
5 based on 1 votes
Brand Name
JCM
Product Name
BASIC+