1. PRODUCTS
  2. Door Automation
  3. Single-Phase
  4. ROLL868 DMR-P

ROLL868 DMR-P

#1003408
Certified product

Dead man single phase control panel platform for roll-up doors

  • Very easy to install and adjust settings
  • Can operate in Deadman or semiautomatic mode (automatic open and Deadman close)
  • Deadman can be adjusted with potentiometer
  • Fob receiver built into the electronic board
  • External buttons can be wired
ROLL868 DMR-P

User manual
UM_3200346_ROLL868DMR_4ID.pdf
Declaration of conformity
CE_ROLL868DMR_EN.pdf

Dimensions: 140x220x55mm
Location: Fixed
Finishing: Surface
Watertightness: IP54, IP65 with glands
Frequency: 868MHz
Users: 27
Channels: 2
Antenna type: Welded antenna
Indicator lights: Yes
Buzzer: Yes
Power Supply: 230VAC 50/60HZ
AC Nominal Consumption (mA): 1
Max AC Consumption (mA): 5
Min Temp (ºC): -20
Max Temp (ºC): 55
Max. activation range (cm): 2.000
Local Connectivity: RFMotion
Suite JCM compatible: No
Supported motors: 1
Supplyable Power to motors (W): 1200W
Certified regulations: CE, UKCA
JCM-TECH 40
JCM-TECH
ABOUT JCM
JCM Technologies was established in 1983, and within a few years it became a leader in the Spanish market.
In 1991 it started its internationalisation process and opened commercial subsidiaries in France and Germany.
JCM Technologies is currently one of the most recognised brands in Europe, and is present in more than 40 countries.
CONTACT US – HEADQUARTERS
Address
Pol. Ind. Sot dels Pradals
C/Costa d’en Paratge, 6 B
08500 Vic (Barcelona)
Opening hours:
Mon-Fri: 8:00-17:00
Sat-Sun: closed
Phone: +34 938 833 231
Email: info@jcm-tech.com
© 1983-2025 JCM Technologies - All Rights Reserved.
Legacy
Declarations
Sales and use conditions
Legal
Rustdesk
×
Español Català Français Deutsch Italiano
×
❮ ❯