Certified product

Configurable single-phase operating control panel with door control by a smartphone

  • Complete version with all finishes that can be totally adapted to your needs 
  • Inputs and outputs can be configured with the VERSUS-PROG programmer
  • 1 connector for expansion cards on board
  • Door can be opened with mobile, with input for SESAME device
  • Fob receiver built into the electronic board

M8NF is a control panel in charge of opening or closing your door. Also to stop it if an emergency is detected.

M8NF listens to transmitters, keypads, safety devices and smartphone applications and after analyzing all the data received, it decides what to do and gives the order to open, stop or close the door.

This is definitively the brain of the system.

User manual
Declaration of conformity

Dimensions: 152x180x88mm
Functionalities: Standard
Location: Fixed
Finishing: Surface
Watertightness: IP54 with pushbuttons, IP32 with courtesy light, IP65 with glands
Frequency: 868MHz
Users: 27
Channels: 4
Operation range: 100 meters
Antenna type: Welded antenna
Indicator lights: Yes
Buzzer: Yes
Power Supply: 230VAC 50/60HZ
AC Nominal Consumption (mA): 23
Max AC Consumption (mA): 43
Min Temp (ºC): -20
Max Temp (ºC): 55
Local Connectivity: RFMotion
Suite JCM compatible: No
Supported motors: 1
Supplyable Power to motors (W): 1200W, 750W
Certified regulations: CE, UKCA

© 1983-2024 JCM Technologies - All Rights Reserved.
Español Català Français Deutsch Italiano