1. PRODUCTS
  2. Door Automation
  3. Single-Phase
  4. M8NF

M8NF

#1005120
Buy M8NF
Certified product 5 warranty years

Configurable single-phase operating control panel with door control by a smartphone

  • Basic version, with software and finishes totally adaptable to your needs 
  • Inputs and outputs can be configured with the VERSUS-PROG programmer
  • 1 connector for expansion cards on board
  • Door can be opened with mobile, with input for SESAME device
  • Fob receiver built into the electronic board
M8NF
M8NF M8NF M8NF M8NF

User manual
UM_3201040_M8NF_EN.pdf
Declaration of conformity
CE_M8NF_EN.pdf
Install&Go M8NF

Dimensions: 152x180x88mm
Functionalities: Standard
Location: Fixed
Finishing: Surface
Watertightness: IP54 with pushbuttons, IP32 with courtesy light, IP65 with glands
Frequency: 868MHz
Users: 27
Channels: 4
Operation range: 100 meters
Antenna type: Welded antenna
Indicator lights: Yes
Buzzer: Yes
Power Supply: 230VAC 50/60HZ
AC Nominal Consumption (mA): 23
Max AC Consumption (mA): 43
Min Temp (ºC): -20
Max Temp (ºC): 55
Local Connectivity: RFMotion
Suite JCM compatible: No
Supported motors: 1
Supplyable Power to motors (W): 1200W, 750W
Certified regulations: CE, UKCA
JCM-TECH 40
JCM-TECH
ABOUT JCM
JCM Technologies was established in 1983, and within a few years it became a leader in the Spanish market.
In 1991 it started its internationalisation process and opened commercial subsidiaries in France and Germany.
JCM Technologies is currently one of the most recognised brands in Europe, and is present in more than 40 countries.
CONTACT US – HEADQUARTERS
Address
Pol. Ind. Sot dels Pradals
C/Costa d’en Paratge, 6 B
08500 Vic (Barcelona)
Opening hours:
Mon-Fri: 8:00-17:00
Sat-Sun: closed
Phone: +34 938 833 231
Email: info@jcm-tech.com
© 1983-2024 JCM Technologies - All Rights Reserved.
Legacy
Declarations
Sales and use conditions
Legal
Rustdesk
×
Español Català Français Deutsch Italiano
×
❮ ❯