RB3 R868


Certified product

Receiver for third-generation RadioBand, UNIVERSAL system, compatible with all the control panels on the market

  • Immune to interferences
  • Wire-free installation between transmitter and receiver
  • Can be connected to all fobs on the market
  • Can connect 3 different kinds of safety edges: optic, resistive (8K2), and mechanical 
  • Can control up to 2 security safety edges on the same transmitter.
  • No need for activation signal for the optical safety edges, which is always active (with OSE-S7502B optics)
RB3 R868
RB3 R868 RB3 R868 RB3 R868

RB3 is a safety device that prevents your door from harming your loved ones or your car. It monitors the status of the door and its environment, and if it detects a potential injury or issue, RB3 sends an alarm so the door can be stopped before any damage is done.
RB3 works in conjunction with a rubber band that has to be installed at the very top bottom of your door.  It uses a radio connection, so no wires are needed, just a RB3, an impact-detection rubber band and a control panel.
RB3 stands for RadioBand 3rd generation.

Sales pitch
User manual
Declaration of conformity
Other certificates

Dimensions: 82x190x40mm
Location: Fixed
Finishing: Surface
Watertightness: IP54, IP65 with glands
Outputs: RSE (Resistive Safety Edge), CSE (Contact Safety Edge)
Integrated/s receiver/s: RBAND3G
Frequency: 868MHz
Users: 6
Channels: 4
Operation range: 50 meters
Antenna type: External antenna
Indicator lights: Yes
Buzzer: Yes
Power Supply: 12/24VAC 12/24VDC
Max DC Consumption (mA): 255
Max AC Consumption (mA): 255
Min Temp (ºC): -20
Max Temp (ºC): 55
Local Connectivity: Others RF
Suite JCM compatible: No
Certified regulations: CE, TUV, UKCA

© 1983-2024 JCM Technologies - All Rights Reserved.
Español Català Français Deutsch Italiano