Gérez et personnalisez vos émetteurs avec les outils de programmation 868 MHz.



Ref: 1002177

  • MASTER 868 MHz transmitter.
  • This allows for the installer code to be installed on GO2, GO4 and  GO MINI transmitters.
  • Wireless programming.
  • MAESTRO MINI size: 55 x 30 x 10 mm.
  • MAESTRO size: 62 x 33 x 11 mm.


Ref: 1003059

  • Portable transmitter, proximity key and card, receiver memory card,  control panel and operating panel programmer.
  • It allows for the installer code assigned to the equipment to be  managed.
  • It operates via a rotary menu using fixed function keys.
  • It has a numeric keypad and low-consumption LCD (1.5 volt  batteries).
  • It has an automatic cut-off function after 3 minutes to save battery,  with an acoustic warning.
  • Main functions: add/remove installer, PIN assignment, code  registering and removal, standby assignment, replacements, channel  configuration, event reading and operating panel parameter configuration.
  • The configuration cable for operating panels is supplied.
  • Can be updated using an update card.
  • Power supply: two AA-type 1.5Vdc batteries.
  • The programmer has an autonomy of approximately 1000 operations.
  • Average / maximum consumption: 8mA/200mA.
  • Temperatura funcionamiento –10ºC a + 60ºC.
  • IP20.
  • Size: 150 x 90 x 26 mm.


Ref: 1000229

Assistant travaille avec notre logiciel Soft Assistant

  • SOFT ASSISTANT is required for operations.
  • ASSISTANT: Programming tool for transmitters, proximity keys and  cards, receivers and access control unit memory cards.
  • Small, tabletop equipment
  • Visual display of operations.
  • Graphic indication of the contact-free programming area for  transmitters, keys and cards.
  • Single connector for the insertion and management of receiver and  control unit memory cards.
  • Can be personalised with the installer code and updated from the  software.
  • USB communications with the PC.
  • Size: 110 x 85 x 25 mm.


Ref: 1000228

  • 433 MHz frequency.


Ref: 1003816

Trainer travaille avec notre logiciel Soft Trainer

  • SOFT-TRAINER is required for operations.
  • TRAINER: Tool to personalise the basic GO and GO MINI transmitters.
  • Compact, tabletop equipment.
  • Size: 120 x 56 x 38 mm.
  • Visual functioning and operating displays.
  • Graphic programming position display.
  • Can be updated from the software.
  • USB communications with the PC.



  • 433 MHz frequency.