MTC1 · DMS · DETEC1 · DETEC2 · DMS-W6 · DMS-W10 · SOCK11

Magnetic vehicle detectors

Magnetic detectors to be connected with loops that allows to detect the presence of vehicles in a determined area.

Detectors

MTC1

Ref: 1002547

  • Plug-in magnetic detector card for operating panel.
  • 12 Vdc power supply (from the panel connector).
  • 40 KHz to 140 KHz oscillation frequency.
  • 30 µH to 250 µH loop inductance.
  • Possible no. of loops connected 1.
  • -20 °C to +85 °C operating temperature (up to 98%Rh).
  • Size: 60 x 48 x 17 mm.

DMS

Ref: 1000750

  • Power: 220Vac.
  • Versions: 1 channel.
  • 100mA operating consumption.
  • 40 KHz to 140 KHz oscillation frequency
  • 30 µH to 250 µH loop inductance.
  • Relay contacts: 6A, 230 Vac
  • Sensitivity levels: 10.
  • Delay time: selectable from 0 to 10 seconds.
  • Detection time: unlimited or limited to 15 minutes.
  • -20 °C to +85 °C operating temperature (up to 98%Rh).
  • Size: 140 x 220 x 55 mm.

DETEC1 · DETEC2

Ref: 5000038 / 5000040

  • Power: 240 V .ac / 12/24 V.
  • Versions: 1 and 2 channels.
  • Consumption: 100mA.
  • 20 KHz to 140 KHz oscillation frequency.
  • 20 µH to 1,500 µH loop inductance.
  • Relay contacts: 5 A, 230 V.
  • Sensitivity levels: 4.
  • Delay time: 150 ms.
  • Detection time: Limited 1 h for 3% L/L.
  • Size: 75 x 75 x 37 mm.

Loops

DMS-W6

Ref: 5000046

  • Loop for vehicle magnetic detector.
  • Pre-wired.
  • Braided wire: maximum 10 meter.
  • Section: -1.5/2mm2
  • Loop length: 6 meters.
  • Hole depth: maximum 50mm.
  • Hole width: maximum 15mm.

DMS-W10

Ref: 5000045

  • Loop for vehicle magnetic detector.
  • Pre-wired.
  • Braided wire: maximum 10 meter.
  • Section: -1.5/2mm2
  • Loop length: 10 meters.
  • Hole depth: maximum 50mm.
  • Hole width: maximum 15mm.

Additional components

SOCK11

Ref: 5000199

11 position sockets for DIN rail (DETEC1 and DETEC2).

Downloads

Projects