Batteries included Certified product 5 warranty years

Transmitter for third-generation RadioBand, UNIVERSAL system, compatible with all the control panels on the market

  • Wire-free installation between transmitter and receiver
  • Universal system: the receiver can connect with all panels on the market
  • Can connect 3 different kinds of safety edges: optic, resistive (8K2), and mechanical  
  • Can control up to 2 safety edges on the same transmitter
  • No need for activation signal for the optical security sensor, which is always active
RB3 TGLA868 RB3 TGL868 RB3 TGL868

RB3 is a safety device that prevents your door from harming your loved ones or your car. It monitors the status of the door and its environment, and if it detects a potential injury or issue, RB3 sends an alarm so the door can be stopped before any damage is done.
RB3 works in conjunction with a rubber band that has to be installed at the very top bottom of your door.  It uses a radio connection, so no wires are needed, just a RB3, an impact-detection rubber band and a control panel.
RB3 stands for RadioBand 3rd generation.

Sales pitch
User manual
Declaration of conformity
Other certificates

Dimensions: 194,5x40x20mm
Location: Fixed
Finishing: Surface
Watertightness: IP42
Outputs: Unidirectional RF
Integrated/s receiver/s: RBAND3G
Frequency: 868MHz
Channels: 4
Operation range: 50 meters
Antenna type: Welded antenna
Indicator lights: Yes
Buzzer: No
Battery number: 2
Power Supply: AA alkaline battery, 1,5V LR6 AA, 3 VDC
Internal Battery Capacity(mAh): 2.600,00
Approximate lifetime (years): 2
Max DC Consumption (mA): 12
Min Temp (ºC): -20
Max Temp (ºC): 55
Local Connectivity: Others RF
Suite JCM compatible: No
Certified regulations: CE, TUV, UKCA

© 1983-2024 JCM Technologies - All Rights Reserved.
Español Català Français Deutsch Italiano