HDOOREVO

• Power supply: The equipment is powered with a 110Vac to 230Vac voltage. 500mA protective fuse.
• Relay Output: The equipment has 2 adjustable open or closed contact relay outputs. These outputs can be programmed to be activated with different fob channels through cloudAssistant. Moreover, these relays can be remotely activated in real time with the cloudAssistant.
• Inputs: The equipment has 2 inputs to connect 2 limit switches to monitor the door’s status (Open/Closed).
• 868MHz MOTION receiver module: The equipment has an 868MHz MOTION receiver module to receive from fobs.
• Extension module for wired keyboards and readers: the device includes two "Wiegand" inputs, a "Wiegand" output, and a "BUS-L" input, whose settings can be managed with cloudAssistant. Consumption of devices connected to these inputs cannot exceed 250mA.
• Communication module: The equipment has a GSM / Cat M1 / NB-IoT communication module for connection to the Internet.
• Users: Up to 5000 users managed with cloudAssistant.
• Events: Up to 5000 events may be viewed through cloudAssistant.
• Statistics and information on use: You may use cloudAssistant to view a daily graph of the number of relay activations, accepted and rejected users, open-door and closed-door events, data consumption, and more.
• Light-up signals: The equipment has three LED indicators: “ST”, “NW”, and “IN” to indicate the cloudAssistant connection status.
• Antipassback
• IP54 (with cable gland IP65)
• Operating temperature -20ºC / +55ºC
• Size (L/W/H) 140 x 220 x 55mm
• BUS-LIN cable length: cable cross-sections 0.22/0.35/0.5 mm2 up to 100/150/200 m, respectively. Category 5 cable.
• Up to 20 proximity readers in the same network using an external power supply (BUS-LIN).
  

Since the HONOADOOR solution devices are connected to the Internet, you can manage them anywhere and instantly, through cloudAssistant by JCM, providing a fast response thanks to online management and task automation.

You can open the door with the MOTION control, MOTION proximity tag, and/or WIEGAND devices.

Along with cloudAssistant, you can use HDOOREVO to instantly check the door's operation from your office, avoiding unnecessary trips to check that installations are working properly and to detect and manage suspicious fobs.